Just in time for Cinco de Mayo, let’s celebrate the latest iteration of the K2DLS DV4mini image for the Raspberry Pi 2, 3, and 3+. Thanks to the folks on the Facebook DV4mini support group for pointing out that the November release did not contain code to boot on the new Raspberry Pi 3 Model B+.
This is a fresh build, based upon the latest Raspbian Stretch. ssh and RealVNC are ready to go and it works nicely with the official 7″ touchscreen. The DV4mini console and the Brandmeister XTG Dialer start up automagically.
Default user: pi
Default password: raspberry (please change on first use!)
You will find the new image here.
Hola, desde Argentina. Te consultó cómo cambiar las memorias de los reflectores BM XTG Memories?
Gracias y saludos 73.
Claudio
LU8ANB
Hello:
The instructions for changing memories are found in the file “/usr/local/share/bmxtg/README”.
73
Hi Dan…
I just dl and install the new DV4mini image, wow it works great total no issues.
After a view settings the RPi-3 it works good, you really make my day Dan !!
Many thanks and 73 de Art VK4GO
Hi, is there any chance on running DV4mini AMBE-version with full functionality on its audio capabilities on a Raspi environment? 73s, LU4CN.
This image works great on a Pi 3B+ For me. Steady as a rock. Thank you Dan
Hello,
i installed the Image for Raspi 3b+ tonight. Software runs without problem, but it cannot find my DV4mini connected at USB Port, only scanning..
With “dmesg” i can see the DV4mini is attached to /dev/ttyACM0
But the Software cannot find my Stick.. Firmware 1.77 is installed on DV4mini, and it works with the German DV4mini Autostart Image from A23-Wertheim (Germany).
Any ideas ?
73 Frank DG3KCE
Usually folks try toggling between local mode and network mode (export settings) when this occurs. Give that a try.
73
Getting Failure 500 on image what could be wrong.
K0ATM
What is wrong is the the administrators of the USA master servers decided to disable reflectors on their servers. This includes TG 4999, which is required for extended routing to work.
The workaround is to select a master outside of the USA.
Is there a BM master that works? Ive tried a few and all still give the same error.
Try 3021 (Canada). That works for me.
Hi Dan,
this image works out of the box on my 3+. Just great and gives me a lot of fun with my old DV4mini.
Thanks for putting this together,
vy73s de Juergen, DM9LSB